| Author |
 Topic  |
DeltaDelta
Posts: 6
|
 Posted - Tue Jan 09, 2001 6:22 pm |
|
|
|
I have an intermittent problem with the volume envelopes. Sometimes when I click near the top of the wave file in the multitrack view, the envelope goes "off the scale" and the envelope point is hidden. No matter how far in I zoom, there is always one sample that I cannot get back into the viewable area. I hope this explination is clear enough, a screenshot would make it clear. My video card is a Diamond 8Meg AGP card set at 16bit color and 1024x768 screen. I'll check it out again at a different resolution later tonight to see if that was part of the problem. Thanks, Dave
|
|
Syntrillium M.D.
Location: USA
Posts: 5124
|
| Posted - Wed Jan 10, 2001 9:03 am |
|
|
Hi Dave. When this occurs, are you able to 're-drag' that envelope point, or does it become lost in the cosmos somehow? I have a few display settings you may want to try adjusting. Are you using version 1.2a? It might be a good idea to upgrade if you haven't already. Let me know the specifics of the situation.
---Syntrillium Support
_________________
|
|
|
|
DeltaDelta
Posts: 6
|
| Posted - Wed Jan 10, 2001 6:10 pm |
|
|
No, I cannot drag that particular sample back into the window. I can get points on each side of the "cosmos" point back into view though.
I am using version 1.2a.
Thanks, Dave
|
|
| |
Topic
|
All Forums
Volume Envelope problem