| Author |
 Topic  |
danthebeast
Posts: 6
|
 Posted - Mon Jun 02, 2003 7:23 pm |
|
|
|
Is there a software that will get rid of clicks when joining 2 different guitar parts togather? I tried the pop/click editer but that distorts the guitar tones that I recorded. Thanks if u can help
|
|
jonrose
Location: USA
Posts: 2901
|
| Posted - Mon Jun 02, 2003 10:39 pm |
|
|
Hi Dan,
I'll assume that you're talking about appending two parts in series, in which case you're probably dealing with a "zero-crossing" problem - the parts don't meet up at the centerline (0) where they join. Try to zoom in and select a spot on each where they both cross the centerline and the beginning of the second is going in the same direction (either positive [up] or negative [down]) as the first file's ending. This will get away from any click problems caused by the join.
If you're talking about something else, you might want to give us some more specifics.
;)
Best... -Jon
_________________
|
|
|
|
jonrose
Location: USA
Posts: 2901
|
| Posted - Mon Jun 02, 2003 10:43 pm |
|
|
Oh... and if you're having this trouble in the Multitrack View of CE, then zoom way in and use the volume envelopes to fade the first waveblock out and the second waveblock in. This will mean you'll need at least a few milliseconds of overlap, of course...
_________________
|
|
|
|
danthebeast
Posts: 6
|
| Posted - Wed Jun 04, 2003 7:11 pm |
|
|
|
thanks for the tip man it works great
|
|
jonrose
Location: USA
Posts: 2901
|
| Posted - Thu Jun 05, 2003 12:15 am |
|
|
Cool. That's why we do this, here...
_________________
|
|
|
|
| |
Topic
|
All Forums
joining guitar parts?