| Author |
 Topic  |
Smoke1
Posts: 5
|
 Posted - Sat Jun 14, 2003 1:04 pm |
|
|
|
When I get a waveform in edit view and play it, I can hear it fine thru my soundcard/speakers. When I go to multitrack view and try to play, there is no sound at all. I have tweaked all the settings I can think of, and even put in 2 sound cards. I think both soundcards are only half-duplex, but that shouldnt even matter if I'm not trying to record, right??? In multitrack view after I press play, the level meters jump around for a second and then level out, even though there are waveforms that should be playing. Seems very strange to me. I have tried reinstalling twice, didnt fix the problem. I am running an older system AMDII 400mhz 328mb RAM Soundblaster16 soundcard, but I dont think that is the problem either. Anyone have any ideas??
|
|
ozpeter
Location: Australia
Posts: 3200
|
| Posted - Sat Jun 14, 2003 4:58 pm |
|
|
What version of CE are you using? If you have a version which has "Options > Device Properties" are you quite sure you have the correct setup there? Using one soundcard (and I'd suggest sticking to one for starters) you should have only that specified as a device in the 'Wave Out' and 'Wave in' tabs, with "Use in EV" ticked, and don't have "wave mapper" selected (normally).
(I have to admit that in checking my own settings to ensure this post is accurate, I found they were wrong! How did that happen?!)
- Ozpeter
|
|
Smoke1
Posts: 5
|
| Posted - Sun Jun 15, 2003 7:32 pm |
|
|
|
I am running Cool Edit Pro version 2.0, and yes I have fooled around with the Device Settings and Device order. They are all pointed to the correct sound card. I know this because I get sound in the edit view, just not in multitrack view. This is really starting to piss me off...
|
|
ozpeter
Location: Australia
Posts: 3200
|
| Posted - Mon Jun 16, 2003 1:16 am |
|
|
So when you press the "Out1' button to the left of the track, you see the correct output device? I'd try prosupport@syntrillium.com (I think that's correct) with this one if nobody else has any ideas.
- Ozpeter
|
|
Smoke1
Posts: 5
|
| Posted - Mon Jun 16, 2003 8:49 pm |
|
|
Yes, I have the OUTs pointed at the correct soundcard also.
When I installed CE 2.0, I began by installing the demo version. I then ran the registration executable and "unlocked" the full version. Would this have anything to do with my problem?
|
|
VoodooRadio
Location: USA
Posts: 3971
|
| Posted - Tue Jun 17, 2003 5:34 am |
|
|
I'm with Ozzie here.... contact support. They'll get you up and running without all the guessing. 
_________________
I said Good Day!
Voodoo
|
|
|
|
Smoke1
Posts: 5
|
| Posted - Thu Jun 19, 2003 10:56 pm |
|
|
|
OK, I uninstalled everything. I downloaded the Cool Edit Pro demo version from the syntrillium website. Installed it just fine. SAME PROBLEM. No sound when i press play in multitrack view. I can hear the individual waveforms in Edit view. I give up! Help...
|
|
ozpeter
Location: Australia
Posts: 3200
|
| Posted - Fri Jun 20, 2003 1:07 am |
|
|
Before Voodoo asks - did you contact support? This problem must be something bizarre which they could talk or email you through. Or something you will kick yourself over when they point out what you've done!
- Ozpeter
|
|
Smoke1
Posts: 5
|
| Posted - Fri Jun 20, 2003 11:11 pm |
|
|
|
Hey, I think I have an idea.... I could contact Support!!! It came to me in a dream......
|
|
| |
Topic
|
All Forums
Sound in edit view playback, but not in Multitrack