Forums | Search | Archives

All Forums  Hardware & Soundcards  Question for M-Audio Audiophile 2496 SC users

Author	Topic
JonR3 Posts: 4	Posted - Tue Jul 29, 2003 7:22 pm  I'm having trouble setting up my M-Audio Audiophile 2496 sound card to record properly in multi-track veiw. When I do a voice-over the vocal track contains the other tracks audio. Does the Audiophile's control panel over ride XP's? How do I configure it properly!? Jon:???:
George W. Posts: 33	Posted - Tue Jul 29, 2003 9:18 pm  JonR3 wrote: I'm having trouble setting up my M-Audio Audiophile 2496 sound card to record properly in multi-track veiw. When I do a voice-over the vocal track contains the other tracks audio. Does the Audiophile's control panel over ride XP's? How do I configure it properly!? Jon:???: Try these settings for XP with the M-Audio 5.10.00.0027 driver: In the Delta Control Panel... Monitor/Mixer: Boost all levels. Patchbay: Select "Monitor Mixer" In CEP... Device Properties... Wave Out: Select "M Audio Delta AP Multichannel" Wave In: Select "M Audio Delta AP Multichannel" This should work. I've gone through all the other combinations and this is the only one that worked correctly for multitracking. I've learned that this is one of the most common questions on setting up the 2496 with CEP. Apparently (or so I was told on R.A.P) CEP won't turn audio input back around to an output for monitoring so the 2496 has to be set up to do it. Based on some exchanges I've had with M-Audio they're not quite up to speed on how CEP works. It get's somewhat confusing when talking to other 2496 users since earlier driver options are described differently. Once set up correctly the card and CEP work very well together. G.
	Topic

Page: